Store / Sensors / PL-Series 50A Voltage/Current Sensor (12AWG)

PL-Series 50A Voltage/Current Sensor (12AWG)

A$45.00 ex. GST

Only 1 left in stock (can be backordered)

Warranty: 1 Year

SKU: M001 Category: Tags: ,

50A – Voltage / Current measurement sensor board, based on Allegro Hall Sensor ACS758-050U.

Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details.

This sensor board connects directly to any Premium-Line (PL-Series) BEC or Sensor Hub X2 (V2).

Connected to the sensor are 2 x 10cm AWG12 wire (red) as a standard.

REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)

Delivered; without sensor cable (comes with the Mauch BEC’s), with CFK enclosure

Note: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95 – 5.05V


  • Without CFK enclosure: 27.5 x 19.5 x 10.5mm (with 2 x 10cm 12AWG)
  • With CFK enclosure: 43.5 x 23.0 x 15mm (with 2 x 10cm 12AWG)


  • Without CFK enclosure: 17g (with 2 x 10cm 12AWG)
  • With CFK enclosure: 22g (with 2 x 10cm 12AWG)

PL-Series Sensor Manual


There are no reviews yet.

Be the first to review “PL-Series 50A Voltage/Current Sensor (12AWG)”

Your email address will not be published. Required fields are marked *