Store / Sensors / PL-Series 200A Voltage/Current Sensor (10AWG)

PL-Series 200A Voltage/Current Sensor (10AWG)

A$49.82 ex. GST

Available on backorder

Warranty: 1 Year

SKU: M003 Category: Tags: ,

200A – Voltage / Current measurement sensor board, based on Allegro Hall Sensor ACS758-200U.

Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details.

This sensor board connects directly to any Premium-Line (PL-Series) BEC or Sensor Hub X2 (V2).

Connected to the sensor are 2 x 10cm AWG10 wire (red) as a standard.

REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)

Delivered; without sensor cable (comes with the Mauch BEC’s), with CFK enclosure

Note: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95 – 5.05V

Size

  • Without CFK enclosure: 27.5 x 19.5 x 10.5mm (with 2 x 10cm 10AWG)
  • With CFK enclosure: 43.5 x 23.0 x 15mm (with 2 x 10cm 10AWG)

Weight

  • Without CFK enclosure: 22g (with 2 x 10cm 10AWG)
  • With CFK enclosure: 27g (with 2 x 10cm 10AWG)

PL-Series Sensor Manual

Reviews

There are no reviews yet.

Be the first to review “PL-Series 200A Voltage/Current Sensor (10AWG)”

Your email address will not be published. Required fields are marked *