Output: 2 x 5.30V / 3A
Accuracy: +/- 0.05V – Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output connector with 4pin Molex CLIK-Mate.
2 x Blue Power “ON’ LED
- 1 x PL 4-14S HYB-BEC – 2 x 5.3V / 3A
- 1 x PL-Series Sensor Cable (150mm)
- 1 x PL-Series Cube/Pixhawk2.1 Backup Power Cable (150mm)
The BEC is delivered without an flight controller cable, so please select the correct cable to match: