Output: 2 x 5.35V / 3A
Accuracy: +/- 0.05V – Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with 4pin Molex CLIK-Mate.
Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.
2 x Blue Power “ON’ LED
- 1 x PL-2-6S BEC (2 x 5.35V/3A) with CFK enclosure
- 1 x PL-Series Sensor Cable (150mm)
- 1 x PL-Series Cube/Pixhawk2.1 Backup Power Cable (150mm)
The BEC is delivered without an flight controller cable, so please select the correct cable to match: