Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.

Output

• 2x 5.30V
• 1x 5.0V
• 1x 12.0V
• 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.

Included

• 1x 021: PL 4-14S HYB-BEC / 1x 5.3V / 3A
• 1x 040: PL – Series sensor cable / L=150mm
• 1x 050: Backup cable for Pixhawk 2.1 / L=150mm
• 1x 5.0V output cable (red/black) one site Molex Clik-Mate 1.25mm-6p, the other site open. / L = 150mm
• 1x  12.0V output cable (white/black) one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm
• 1x Enclosure

Additional (BEC to Autpilot cables)

• Mauch 041: PL – FC cable for Pixhawk / APM / DF13-6p / 150mm
• Mauch 042: PL – FC cable for Cube / Pixhawk2.1 / MolexClik-Mate2.0-6p / 150mm
• Mauch 043: PL – FC cable for Pixhawk 3 / JST-GH-6p / 150mm