Output:

• 2 x 5.30V / 3A
• 1 x 5.0V / 3A

Accuracy: +/- 0.05V – Ripple 1mV @ 1.5A output current.

Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output connector with 4pin Molex CLIK-Mate.

3 x Blue Power “ON’ LED

Included

• 1 x PL 4-14S HYB-BEC – 2 x 5.3V / 3A + 1 x 5.0V / 3A
• 1 x PL-Series Sensor Cable (150mm)
• 1 x PL-Series Cube/Pixhawk2.1 Backup Power Cable (150mm)
• 1 x 5.0V output cable (150mm) – 6pin Molex CLIK-Mate to bare wires

Needed

The BEC is delivered without an flight controller cable, so please select the correct cable to match:

• PL-Series Pixhawk/APM Cable (150mm)
• PL-Series Cube/Pixhawk2.1 Power Cable (150mm)
• PL-Series Pixhawk3/etc. Cable (150mm)