Features
- Up to 12-cell Lithium battery (50.4V)
- 140A continuous current with 280A surges
- Power and signal for ESCs conveniently located in corners
- 12V navigation light power available at each corner
- Built-in power distribution
- Built-in voltage and current sensing
- Redundant power supplies for critical flight components
- Payload connectors with resettable fuses for 5V, 12V, and direct battery power
- “Power Good” and “Power Error” indicator lights
- Built-in buzzer with volume control
- Connectors for every function of Pixhawk Cube
- Easily accessible PWM voltage level selector (3.3V or 5V)
- Resistant to ground bounce on PWM signal
- Connector-compatible with standard ProfiCNC carrier board
- Connector ports for debugging IO and FMU processors
Standard Cables:
- 4-pin JST GH
- 6-pin JST GH
Payload Power Cables:
- 4-pin Clik-Mate 1.25mm (for 5V payload power)
- 5-pin Clik-Mate 1.25mm (for 12V payload power)
- 6-pin Clik-Mate 1.25mm (for battery payload power)
